TMT Tubing Head L Loop Debris Cap

 

 

In the exploitation of offshore oilfields, a subsea tubing head may not be used for production immediately after it has been installed at the wellhead. In such circumstances there is a need to protect the tubing head sealing surfaces against corrosion. Protection against damage or obstruction by falling debris, silt and biological accretions is also required.

 

The TMT Tubing Head L-Loop Debris Cap is designed for the tubing head L-loop vertical hub.

 

The Cap has rubber face seal on contact area with L-loop hub to minimise loss of preservation fluid from within the L-loop.