The Typhoon MK2 is a 150HP heavy work class ROV with 3000m depth rating that is based on the Typhoon MK1. It has been designed by ROV operators for ROV operators with an emphasis on reliability, easy maintenance, low cost and ease of use. Compared to other ROV’s in its class, the Typhoon MK2 has a number of unique features.

ROV General

Depth Rating	3000 Meters
Length	3.5 Meters
Width	1.8 Meters
Height (Drill Support Mode)	2.2 Meters
Weight (Drill Support Mode)	5000 Kg
Frame Proof Load	30,000 Kg
Thru Frame Lift	3500 Kg

Propulsion

Forward	1000 Kg
Astern	1000 Kg
Port / Starboard	800 Kg
Vertical Up / Down	800 Kg

Recording Equipment

Lights	Hi Power LED & Halogen
Cameras	16x Multidrop HD Colour Var. Zoom + Focus
Sonar System	Imaginex
Video Recorder	Hard disk & DVD

Arms

Longitudinal Deployment Platters	x3
Grabber	2 Function (TMT)

Seabed Reference Positioning System

Winch (line pull)	8000 Kg
Winch (drum capacity)	2 Function (TMT)
SRPS Weight	500 Kg

Hydraulic Packs

Power

150 HP

Tools to Assist Drilling

Gasket Ring Tool	Smart Torque Tool
Guide Wire Cutter	Rig Floor Monitor
Guide Post Cutter	Mini Dredge / Megga Digga
Plate Handling Tool	Smart Level
CP Probe

Control Van / Workshop

Length	6.1 Meters
Width	2.4 Meters
Height	2.75 Meters
MGM (Offshore lift rated)	16000 Kg
Zone One	Standard
Workshop	Integrated
HVAC	2x7kW Reverse cycle AC

Umbilical Winch

Umbilical Diameter	0.042 Meters
Drum Capacity	2000 Meters
Length	3.5 Meters
Width	2.5 Meters
Height	3.1 Meters
Weight (incl 2000m umbilical)	25 T
Dual VSD Electrical Drive	74 KW

Launch & Recovery Systems: Options

Over the Side Hydraulic A-Frame

Dynacon

TMS

Fixed Rig Sliding Door

Hydraulic Accumulator

HPU failsafe that allows the ROV to disengage the sub, finalise tooling functions and stow arms in the event of hydraulic power loss.

Seabed Reference Positioning System (SRPS)

Increases visibility by eliminating the need for vertical thrust near the ocean floor. The ROV can use the SRPS for precise vertical positioning and for heavy lift assistance.

Electronic Architecture

Distributed node control including automated heading and station hold, expandable RS485 network with a range of quick-change PCB's for different applications. Dual redundant control and modem interface.

20’ Control Van / Workshop

Most compact deck footprint for heavy work class ROV with integrated workshop (optional), control cabin and electrical compartment.

Electric Winch

45m/min dual VSD drive electric winch with full redundant drive and transmission system

Manipulators

Permanent 2 function grabber with up to 3 manipulators on z-function mounts. Manipulator options with backup units and onshore full service workshop:

Schilling T4 8-function

Rigmaster 5-function

7-function rate manipulator