The Typhoon is a 150HP heavy work class ROV with 3000m depth rating. It has been designed by ROV operators for ROV operators with an emphasis on reliability, easy maintenance, low cost and ease of use. Compared to other ROV’s in its class, the Typhoon has a number of unique features.

ROV General

Depth Rating	3000 Meters
Length	2.0 Meters
Width	1.6 Meters
Height (Drill Support Mode)	2.0 Meters
Weight (Drill Support Mode)	3800 Kg
Payload	800 Kg
Frame Lift	3500 Kg

Propulsion

Forward	1000 Kg
Astern	1000 Kg
Port / Starboard	800 Kg
Vertical Up / Down	800 Kg

Recording Equipment

Lights	Hi Power LED & Halogen
Cameras	16x Multidrop HD Colour Var. Zoom + Focus
Sonar System	Imaginex
Video Recorder	Hard disk & DVD

Arms

Longitudinal Deployment Platters	x3
Grabber	2 Function (TMT)

Seabed Reference Positioning System

Winch (line pull)	8000 Kg
Winch (drum capacity)	2 Function (TMT)
SRPS Weight	500 Kg

Hydraulic Packs

Power

150 HP

Tools to Assist Drilling

Gasket Ring Tool	Smart Torque Tool
Guide Wire Cutter	Rig Floor Monitor
Guide Post Cutter	Mini Dredge / Megga Digga
Plate Handling Tool	Smart Level
CP Probe

Control Van / Workshop

Length	6.1 Meters
Width	2.4 Meters
Height	2.75 Meters
MGM	15000 Kg
Zone One	Standard
Workshop	Integrated

Umbilical Winch

Umbilical Diameter	0.042 Meters
Drum Capacity	2000 Meters
Length	3.5 Meters
Width	2.5 Meters
Height	3.1 Meters
Weight (incl 2000m umbilical)	25 T
Dual VSD Electical Drive	74 KW

Launch & Recovery Systems: Options

Over the Side Hydraulic A-Frame

Dynacon

TMS

Fixed Rig Sliding Door

Hydraulic Accumulator

HPU failsafe that allows the ROV to disengage the sub, finalise tooling functions and stow arms in the event of hydraulic power loss.

Seabed Reference Positioning System (SRPS)

Increases visibility by eliminating the need for vertical thrust near the ocean floor. The ROV can use the SRPS for precise vertical positioning and for heavy lift assistance.

Nodal Electronic Architecture

Expandable RS485 control network with a range of quick-change PCB’s for different applications. PC independent failsafe master controller.

20’ Control Van / Workshop

Most compact deck footprint for heavy work class ROV with integrated workshop, control cabin and electrical compartment.

Electric Winch

Fully redundant dual electric drive winch.

Manipulators

Extra z-function for all 3 manipulators, plus permanent 2-function grabber. Titan 4 (8f+1z), Hercules (7f+1z) and Rigmaster (5f+1z) manipulators provided with on-shore backup units and full service workshop.

Tooling Interface

High flow tooling ports with controllable pressure and flow. Wide range of off the shelf tooling, including: combo plate handling/smart torque tools, smart/standard torque tools, gasket installation and removal tool, rope and wire cutters, water-blasters, mini dredge/megga digga, Imenco latch release, hot-stabs, 50t linear override, chain camera, intensifier, scrubbers and cleaners.